Wifi Party at the YLD Office

  • Data: 7:00 PM to 9:00 PM - Tuesday, January 26, 2016
  • Localização: Rua Ramalho Ortigão nºs 8, 3º Esquerdo 1070-230, Lisboa

Agenda

  • quick presentation of Unimos
  • quick presentation of the technical details
  • Installation of OpenWRT on your device and configuration
  • Tests \o/
  • Networking :)

Routers Available at the meetup

Steps to follow

1. Identify the Router you have

You will be able to find, typically in the back of your Router, the Model and Version of your Router, this information will be used to identify which version of OpenWRT you will need to install. See image below for an example:

cldup.com_n5yx1mtosa.jpg

2. Install OpenWRT

Find the router you have in the official list of OpenWRT compatible routers here: https://wiki.openwrt.org/toh/start

Different router models have different levels of adoption and that reflects in the depth of the documentation available. As a user of any given Router and due to the FOSS (Free and Open Source Software) nature of this project, you can (and are very welcome to), contribute, suggest edits to the docs and add more information.

=2.1 Connect your Router following the diagram=

You can identify the ports by looking at the following image:

cldup.com_gymr6tepn2-3000x3000.jpeg

After this setup is done, make sure you have connectivity by testing ping in your terminal. Once you have confirmed, open your browser at 192.168.0.1 to access TP-LINK Management dashboard.

_TODO: WE NEED A SCREENSHOT HERE OF THE DEFAULT TP-LINK ADMIN PANEL_

3. Get your IP Address from Unimos

Before configuring your router, it is handy to have an IP Address Range already available that you can use it to configure. To get this IP Address Range, send an email to suporte@unimos.net introducing yourself and why do you want to join the network, requesting for a IP Address Range that you can use in your Unimos ready router. Sending cats up your priority.

4. Configuration

To configure your router, we have to access it through a remote terminal. You can do it by following the steps below:

=4.1 telnet into your router=

=4.2 wget the configuration script=

=4.3 run the script=

Continue to learn

Final Notes

  • Make sure to take a picture of the meetup :)
Print/export
QR Code
QR Code localizacao:lisboa:wifi-party-lisboa-26-jan-2016 (generated for current page)