SMC WBR14-G

Este router não suporta OpenWRT. Tem apenas 2MB de memória flash e 16MB de RAM. O chip é o infame ISL3893, como se pode ler na imagem em baixo. FIXME confirmar flash&memória

Em tempos foram feitos esforços para criar firmware open-source para este chip. Infelizmente ainda não existe nada que se possa considerar estável. Ver Links em baixo.

SMCWBR14-G

Pinout

LEDs

NC  NC  NC  NC  VCC
 o   o   o   o   o
 o   o   o   o   o
NC  RX  TX  NC  GND

É igual ao da Fonera.

Logs

Arranque normal

Rescueing Boot for the ISL3893, version 0.5.1.0
Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved.
MAC Address: <snip>
Forcing soft reset from Bootloader�
Rescueing Boot for the ISL3893, version 0.5.1.0
Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved.
MAC Address: <snip>

Boot: start searching for image... Found
Boot: Checking Image CRC32...  Okay.
Disable PORT 0









                            NetMall System Boot


Copyright 2003  Accton, Inc.



CPU: Intersil ISL3893  Processor
POST Version: 0.00.08
Creation Date: 2004.09.07


Press <space> key three times to stop auto-boot...
0

Verifying product code......PASS
Boot Product Code!!!
 Reg0x00 = 0xFFFF 
 Reg0x01 = 0x880F 
 Reg0x02 = 0x0000 
 Reg0x03 = 0x840F 
 Reg0x04 = 0x0000 
 Reg0x05 = 0x840F 
 Reg0x06 = 0x0000 
 Reg0x07 = 0x840F 
 Reg0x08 = 0x840F 
 Reg0x09 = 0x881F 
 Reg0x0A = 0x5902 
 Reg0x0B = 0x8000 
 Reg0x0C = 0xFA50 
 Reg0x0D = 0xFA50 
 Reg0x0E = 0xFA50 
 Reg0x0F = 0xFA50 
 Reg0x10 = 0x0040 
 Reg0x11 = 0xFF20 
 Reg0x12 = 0x3600 
 Reg0x13 = 0xFFFF 
 Reg0x14 = 0xFFD4 
 Reg0x15 = 0xFF01 
 Reg0x16 = 0xFFFF 
 Reg0x17 = 0xFFFF 
 Reg0x18 = 0xFFFF 
 Reg0x19 = 0xFFFF 
 Reg0x1A = 0xFFFF 
 Reg0x1B = 0xFFFF 
 Reg0x1C = 0xFFFF 
 Reg0x1D = 0xFFFF 
 Reg0x1E = 0xFFFF 
 Reg0x1F = 0xFFFF 
 Reg0x20 = 0xFFFF 
 Reg0x21 = 0xFFFF 
 Reg0x22 = 0xFFFF 
OID_CTRL_SetFrequency: New channel is 3 !
OID_CTRL_SetSSID: New SSID is 'ISL3893_11G' !
Crash log handle begin:007C0048
wlanSetSSIDBrdCast: Hide real SSID!
OID_CTRL_SetNitroMode: set value = 1000
OID_CTRL_SetSTATimout: set value = 600

DHCPC:DHCP Client Started.

DHCPS:DHCP Server Started.

==========================================================================
  WG4005D-17 project:
    Command Line Interface. v.1.00.028 2005.04.21
  MVC version:  V1.0.2.1 
==========================================================================

cmd> ap_cfg_Init: ap_cfg.wireless_mode_admin = 3
ap_cfg_SetwirelessModeAdmin: admin = 3
OID_CTRL_SetSSID: New SSID is '<snip>' !
OID_CTRL_WEPDefaultkey: index is 1 -64Bit 
         WEP Key: <S  NI  PS  NA  P> OID_CTRL_WEPDefaultkey: index is 2 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkey: index is 3 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkey: index is 4 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkeyId: Set WepDefaultKeyId is 0 !
OID_CTRL_SetSSID: New SSID is '<snip>' !
wlanSetSSIDBrdCast: Show real SSID!
WLAN_IfStop: device state is 2 ,type is 1!
WLAN_IfStop: Device already running!
wlanReset: Device already running!
OID_CTRL_SetFrequency: New channel is 11 !
OID_CTRL_SetSSID: New SSID is '<snip>' !
OID_CTRL_SetSSID: New SSID is '<snip>' !
wlanSetSSIDBrdCast: Show real SSID!
OID_CTRL_WEPDefaultkey: index is 1 -64Bit 
         WEP Key: <S  NI  PS  NA  P> OID_CTRL_WEPDefaultkey: index is 2 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkey: index is 3 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkey: index is 4 -64Bit 
         WEP Key: 00  00  00  00  00 OID_CTRL_WEPDefaultkeyId: Set WepDefaultKeyId is 0 !
OID_CTRL_SetNitroMode: set value = 1000
OID_CTRL_SetSTATimout: set value = 600
add listen port

Discovery >> Success to get if addr = 102a8c0
arp_rtrequest: bad gateway value
>> Discovery Serial NO =  ...

>> Discovery Serial NO = S515005585 ...

Discovery >> Ready to be discovered

cmd>

O comando 'help' mostra as opções disponíveis.

Conteúdo da memória: FIXME 4MB? Isto é flash ou RAM?

cmd> memShow

Memory Pool List
--------------------------------------------------------------------------
   Name            StartAddr  Size  MinAlloc Available    Type TasksWaiting
===========================================================================
0. KenMem          0x3C696C   1835008   48      540344    FIFO          0         
1. FileMem         0x5869EC   1179648   48      144       FIFO          0         
2. SysMem          0x6A6A6C   1086868   48      848480    FIFO          0         
---------------------------------------------------------------------------

Bootloader

Press <space> key three times to stop auto-boot...

Net Routing Table:
Destination     Gateway           NetMask         Flags   Used Hops Interface
-------------------------------------------------------------------------------


     POST Menu
=========================
[1] Xmodem Download 
[2] Jump to MTFW 
[3] Reset Button test 
[4] Print Boot Params 
[5] Set Boot Params 
[6] Exit 


Please enter your number: 1
Press any key to start downloading.

(...)
Please enter your number: 2
<reboot>

(...)
Please enter your number: 3

Press reset button in 10 seconds

RESET DETECTED


Please press any key to continue...



Please enter your number: 4


Print Boot Parameters.
==========================

Serial number: S515005585

Hardware version: 01

Mac addres: <snip>
Number of Mac address: 2

Number of configured interface: 2
  0: ifname="adm0", ip=192.168.2.1, mask=255.255.255.0, gateway=192.168.2.111
  1: ifname="adm1", ip=192.168.1.1, mask=255.255.255.0, gateway=192.168.1.111

UUID 0: <snip>
UUID 1: <snap>
UUID 2: <snip>
UUID 3: <snap>

Ship Area: WW

Channel Range:  113

Apesar daquela configuração, não há actividade nos interfaces ethernet.

Print/export
QR Code
QR Code hardware:smcwbr14g (generated for current page)